 |
| Brake Assembly Parts |
Brake Assembly This is the brake assembly we have their the Brake shoe, The adjusting Lever, Parking Brake Cable, Wheel/Cylinder Assembly, Primary Shoe Return Spring/Return Spring, Adjusting Screw, Screw Adjsuter, Anchor Spring/Adjusting Spring. Each of the parts have their own functions.Brake Shoe - the function of the brake shoe is to contact and to grip from his position to the brake drum.Adjusting Lever - is to adjust the measurement between brake shoe to the brake drum. This also called as the "Manual Adjuster".Parking Brake Cable - this is the secondary connection of the brake. Which is commonly called as the "Hand Brake". This is also used to adjust the measurement between the brake shoe to the brake drum. This is also called as the "Easy Access Adjusting". Because you can adjust by not getting the tire.
Wheel/Cylinder Assembly - this would act as the connection from brake fluid to push the brake shoe to grip the brake. Cylinder Assembly have 2 parts inside of them. Which is the Piston and the Spring. Pistons act as the pusher from the pressure of the brake fluid and he will push the brake shoe to contact the brake drum. Which is cause for the brake.Return Spring - is used to adjust and to hold the adjuster lever. Which is commonly known as the return spring because this is act also as the holder of the adjuster lever.Adjusting Screw - is used to adjust from inner to outer. When the brake shoe comes thick and need to adjust by turning it. So that it will have good contact between brake shoe and the brake drum.Adjuster Screw - is used to hold the brake shoe to avoid causing disengagement from the brake. This also an very important things. Just to support the brake shoe by arcing.Anchor Spring - this is the secondary spring which is holding the brake shoe apart.To familiarize on how to assemble the Brake Assembly just refer to the image above.
No comments:
Post a Comment